配电综合测控仪系统的通信协议及软件设计

张晓萍; 都洪基; 张 哲; 罗玉春; 李鹏飞

引用本文:	张晓萍,都洪基,张哲,等.配电综合测控仪系统的通信协议及软件设计[J].电力系统保护与控制,2007,35(23):31-34.
	ZHANG Xiao-ping,DU Hong-ji,ZHANG Zhe,et al.Communication protocol & software design of distribution measure and control instrument system[J].Power System Protection and Control,2007,35(23):31-34

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 3765次下载 2298次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
配电综合测控仪系统的通信协议及软件设计
张晓萍, 都洪基, 张哲, 罗玉春, 李鹏飞
南京理工大学动力学院，江苏南京 210094

摘要:

为满足配网自动化对配电综合测控仪提出的数据通讯的要求，制定了配电综合测控仪系统通信规约并实现了配电综合测控仪与抄表仪之间的数据通讯。采用VC++开发环境的MFC编程实现了配电综合测控仪系统主子站的操作界面、主子站对数据库的操作，最重要的是实现了主子站的串口通信，可以完成参数设置、数据查询、子站复位和遥控等功能。功能强大、传输性能好，应用前景广泛。

关键词: 配电综合测控仪通讯规约 MFC编程技术串口通信

DOI：10.7667/j.issn.1674-3415.2007.23.008

分类号:

基金项目:

Communication protocol & software design of distribution measure and control instrument system

ZHANG Xiao-ping, DU Hong-ji, ZHANG Zhe, LUO Yu-chun, LI Peng-fei

School of Power, Nanjing University of Science & Technology, Nanjing 210094, China

Abstract:

To meet the requirement of the distribution measure and control instrument’s communication function, this paper designs the protocol and accomplishes the communication between the intelligent instrument and the master station. The communication protocol referring to the IEC870-5-101 protocol has been drawn up. Moreover, using MFC of VC++, accomplished the interface of the master and child station, the operation to database and the communication between the master and child station. This system can achieve the functions such as data set-up, data query, unsetting the child station and tele-control. It will be widely applied in industrial field because of its outstanding performance.

Key words: distribution measure and control instrument communication protocol MFC technique serial ports’ communication

X关闭