引用本文:夏溢,邰能灵,范春菊,等.参数不对称同塔四回输电线的零序四分量法及故障分析[J].电力系统保护与控制,2013,41(18):9-16.
XIA Yi,TAI Neng-ling,FAN Chun-ju,et al.Four zero-sequence component method of asymmetry-parameter four-parallel lines on the same tower and its fault analysis[J].Power System Protection and Control,2013,41(18):9-16
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5162次   下载 239 本文二维码信息
码上扫一扫!
分享到: 微信 更多
参数不对称同塔四回输电线的零序四分量法及故障分析
夏溢1, 邰能灵1, 范春菊1, 于仲安2
1.上海交通大学电子信息与电气工程学院,上海 200240;2.江西理工大学电气工程与自动化学院,江西 赣州 341000
摘要:
同塔四回输电线路大量存在阻抗参数的不对称性。为了完全解耦参数不对称的阻抗矩阵,提高同塔四回输电线路的故障分析精度,需引入新型的相模变换方法。为此,参考已有相模变换的解耦思路,提出零序四分量法。该方法保持各回线的正、负序量不变,仅在零序中单独引入一个同向量和三个带修正系数的环流量,从而完成矩阵的完全解耦。零序四分量法可分别应用于同电压等级和跨电压等级的参数不对称同塔四回线系统的故障分析。由序分量定义与故障边界条件可得各故障复合序网。仿真结果证明了零序四分量法所得故障分析结果的正确性。
关键词:  同塔四回线  参数不对称  零序四分量法  解耦  故障分析
DOI:10.7667/j.issn.1674-3415.2013.18.002
分类号:
基金项目:国家自然科学基金资助项目(51177066)
Four zero-sequence component method of asymmetry-parameter four-parallel lines on the same tower and its fault analysis
XIA Yi,TAI Neng-ling,FAN Chun-ju,et al
Abstract:
Many four-parallel lines on the same tower show the asymmetry of parameters. A new phase-mode transform introduced is introduced to totally decouple the asymmetric matrix and improve the accuracy of fault analysis of four-parallel lines. Referring decoupling method of existing phase-mode transformation, four zero-sequence component method (FZCM) is proposed. Keeping positive and negative sequence components unchanged, this method introduces a same-direction component and three circulation components with correction factors to decouple the matrix. FZCM can be applied to fault analysis of asymmetry-parameter four-parallel lines under same voltage grade or different voltage grades. Fault sequence network can be figured out by the sequence component definition and fault boundary condition. Simulation results prove the validity of four zero-sequence component method for fault analysis.
Key words:  four-parallel lines on the same tower  parameters unbalance  four zero-sequence component method  decoupling  fault analysis
  • 1
X关闭
  • 1
X关闭