引用本文:潘丁,谢梦雪,王志立,等.IEEE1588协议在智能变电站应用的模型分析及测试研究[J].电力系统保护与控制,2013,41(19):140-146.
PAN Ding,XIE Meng-xue,WANG Zhi-li,et al.Model analysis and testing of IEEE1588 protocol applied in smart substation[J].Power System Protection and Control,2013,41(19):140-146
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5322次   下载 387 本文二维码信息
码上扫一扫!
分享到: 微信 更多
IEEE1588协议在智能变电站应用的模型分析及测试研究
潘丁1, 谢梦雪2, 王志立3, 袁亮1, 梅林常3
1.许继集团有限公司,河南 许昌 461000;2.许继电源有限公司,河南 许昌 461000;3.鹤壁供电公司,河南 鹤壁 456600
摘要:
为了解决普通对时模式在分布式以太网络中对时精度低或专网施工复杂等问题,在智能变电站以太网络中引入IEEE1588时钟同步协议。分析和研究了IEEE1588普通时钟、边界时钟和透明时钟模型的校准特性和时钟属性,并搭建智能变电站仿真网络结构模型,进行模型验证和校准特性仿真测试验证,仿真测试结果表明IEEE1588协议应用在智能变电站以太网络中提高了时钟同步精度,简化了智能变电站网络结构,具有推广应用的现实价值。
关键词:  IEEE1588  时钟模型  普通时钟  边界时钟  透明时钟  PTP  时钟同步
DOI:10.7667/j.issn.1674-3415.2013.19.021
分类号:
基金项目:
Model analysis and testing of IEEE1588 protocol applied in smart substation
PAN Ding,XIE Meng-xue,WANG Zhi-li,et al
Abstract:
The ordinary synchronization mode in distributed Ethernet network shows low synchronization accuracy and complex network construction, so this paper introduces IEEE1588 clock synchronization protocol to the Ethernet network in smart substation. Calibration characteristics and clock attribute of the IEEE1588 common clock, boundary clock and transparent clock model are analyzed, and the simulation model of network structure of smart substation is built to conduct model verification and calibration characteristic simulation test. Results show that the IEEE1588 protocol used in Ethernet smart substation improves the precision of clock synchronization, simplifies the network structure of smart substation, and has practical value of popularization and application.
Key words:  IEEE1588  clock model  ordinary clock  boundary clock  transparent clock  PTP  clock synchronization
  • 1
X关闭
  • 1
X关闭