| 引用本文: | 段晓波,朱明星,胡文平,等.交流电弧炉SVC装置2次滤波支路设计校核新方法[J].电力系统保护与控制,2014,42(1):126-133.[点击复制] |
| DUAN Xiao-bo,ZHU Ming-xing,HU Wen-ping,et al.Research on the design and check method of the secondary filter branch for SVC device of the AC arc furnace[J].Power System Protection and Control,2014,42(1):126-133[点击复制] |
|
| 摘要: |
| 交流电弧炉不仅属于典型的谐波污染源、闪变发生源，而且交流电弧炉冶炼过程在2次附近产生较大的间谐波分量。基于某实际钢铁公司交流电弧炉谐波发生量和SVC装置参数的定量分析及仿真研究，得到交流电弧炉必须设置2次C型滤波器，保证将电弧炉2次左右的谐波和间谐波放大控制在一定范围内的研究结论。在此基础上给出2次滤波支路的设计方法，提出了2次滤波支路安全校核新方法，指导交流电弧炉滤波装置工程设计。 |
| 关键词: 交流电弧炉 谐波和间谐波 静止无功补偿器 2次C型滤波器 安全校核 |
| DOI：10.7667/j.issn.1674-3415.2014.01.019 |
|
| 基金项目:河北省电力公司2012综合计划项目（kj2012-048）；青海省重大科技专项（2012-J-A1） |
|
| Research on the design and check method of the secondary filter branch for SVC device of the AC arc furnace |
| DUAN Xiao-bo1,ZHU Ming-xing2,HU Wen-ping1,RONG Shi-yang1,QIAN Chen-chen2,HAN Bing2 |
| () |
| Abstract: |
| The AC arc furnace is a typical pollution source of harmonic wave as well as a flicker source. It also produces larger inter-harmonic component during working near secondary harmonic. This paper analyzes and simulates the harmonic quantity and the parameters of SVC device of the arc furnace in a steel company. The conclusion shows that it is better to install the secondary filter of type C for the arc furnace in order to limit the harmonic and interharmonic near secondary. A new checking method is put forward for the secondary filter branch, which is a good method that can instruct the design of the AC arc furnace filter. |
| Key words: AC electric arc furnace harmonics and interharmonic SVC secondary filter of type C safety checking |
