引用本文:郑欣,陈文炜,林舜江,等.考虑泵类负荷特性的低压配电网潮流计算[J].电力系统保护与控制,2014,42(20):25-31.
ZHENG Xin,CHEN Wen-wei,LIN Shun-jiang,et al.Power flow calculation of low voltage distribution network including pump loads[J].Power System Protection and Control,2014,42(20):25-31
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5298次   下载 3029 本文二维码信息
码上扫一扫!
分享到: 微信 更多
考虑泵类负荷特性的低压配电网潮流计算
郑欣1, 陈文炜1, 林舜江2, 陈宏岩2, 梁立峰1, 梁超凡1
1.广州供电局有限公司,广东 广州 510620;2.华南理工大学电力学院,广东 广州 510640
摘要:
提出了一种考虑泵类负荷特性的低压配电网潮流计算方法。通过将泵类负荷的电动机转矩平衡方程和配电网各节点功率平衡方程组合起来,构成了考虑泵类负荷特性的低压配电网潮流计算模型。在求解配电网潮流计算的牛拉法的基础上,提出通过将泵类负荷电动机转矩平衡方程与各节点功率平衡方程进行统一迭代和交替迭代两种方法进行求解。通过对实际低压配电网台区的计算分析,验证了该方法能获得更加准确的配网负荷节点电压,而且能够获得泵类负荷正常运行时和启动时的节点电压。
关键词:  潮流计算  低压配电网  泵类负荷  感应电动机  统一迭代法  交替迭代法
DOI:10.7667/j.issn.1674-3415.2014.20.005
分类号:
基金项目:国家自然科学基金项目(51207056);广东高校优秀青年创新人才培养计划项目(LYM11014)
Power flow calculation of low voltage distribution network including pump loads
ZHENG Xin1, CHEN Wen-wei1, LIN Shun-jiang2, CHEN Hong-yan2, LIANG Li-feng1, LIANG Chao-fan1
1.Guangzhou Power Supply Bureau, Guangzhou 510620, China;2.School of Electric Power, South China University of Technology, Guangzhou 510640, China
Abstract:
This paper presents a method of power flow calculation for low voltage distribution network including pump loads. By combining torque balancing equations of induction motors in pump loads and power balance equations of each node in distribution network, the low-voltage distribution network power flow calculation model including pump load characteristics is constituted. Based on the Newton-Raphson algorithm of solving the distribution network power flow calculation, two methods of uniform iteration and alternating iteration of pump load motor torque balance equations with each node power balance equations are proposed to solve the problem. The numerical results of real low voltage distribution networks show that the proposed method can obtain load nodes voltage more accurately, and it can get the node voltage of pump loads during normal operation and startup.
Key words:  power flow calculation  low voltage distribution network  pump loads  induction motors  uniform iterative method  alternating iterative method
  • 1
X关闭
  • 1
X关闭