引用本文: | 李鹏辉,陈建林,申忠利,等.基于偏最小二乘法的气动执行机构故障诊断研究[J].电力系统保护与控制,2018,46(11):76-82.[点击复制] |
LI Penghui,CHEN Jianlin,SHEN Zhongli,et al.Research on fault diagnosis of pneumatic actuator based on partial least square method[J].Power System Protection and Control,2018,46(11):76-82[点击复制] |
|
摘要: |
气动调节阀是工业生产中重要的控制装置,其故障诊断技术越来越受到重视。基于DAMADICS平台建立气动阀门仿真模型,利用DABLib模块生成故障数据。提取故障数据的主元向量,构建PLS模型,将多变量的高维空间影射到低维空间,对数据进行压缩和标准化处理。借助Hotelling T2和SPE统计检测法对平台生成的测试数据与实际数据的残差进行分析。仿真结果表明,该方法实现了对阀门故障的诊断和分类,效果明显。 |
关键词: 气动调节阀 故障诊断 主元向量 PLS |
DOI:10.7667/PSPC170775 |
投稿时间:2017-05-23修订日期:2017-08-05 |
基金项目:湖南省科技厅项目资助(2012FJ4251);湖南省教育厅项目资助(20150637) |
|
Research on fault diagnosis of pneumatic actuator based on partial least square method |
LI Penghui,CHEN Jianlin,SHEN Zhongli,LIU Shuai,LI Xiongfei,GUAN Chenglong |
(School of Energy and Power Engineering, Changsha University of Science and Technology, Changsha 410004, China;Hunan Xiangdian Test & Research Institute Co., Ltd, Changsha 410007, China;School of Electrical and Information Engineering, Changsha University of Science and Technology, Changsha 410004, China) |
Abstract: |
Pneumatic control valve is an important control device in industrial production, and its fault diagnosis technology is paid more and more attention. The simulation model of pneumatic valve is established based on the DAMADICS platform, and the fault data is generated by DABLib module. The principal component vector of fault data is extracted and the PLS model is constructed. The multidimensional high-dimensional space is mapped to the low-dimensional space, and its data is compressed and normalized. The results of Hotelling T2 and SPE statistical analysis are used to analyze the residuals of the test data and the actual data generated by the platform. The simulation results show that the method realizes the diagnosis and classification of the valve faults, and the results are effective. This work is supported by Hunan Science and Technology Department Project (No. 2012FJ4251) and Hunan Provincial Department of Education Project (No. 20150637). |
Key words: pneumatic control valve fault diagnosis principal component vector PLS |