| 引用本文: | 高崇,赵懿祺,唐俊熙,张俊潇.以解决现状电网问题为导向的配电网自动规划方法研究[J].电力系统保护与控制,2018,46(15):85-92.[点击复制] |
| GAO Chong,ZHAO Yiqi,TANG Junxi,ZHANG Junxiao.Research on an innovative problem-oriented automatic distribution network planning method[J].Power System Protection and Control,2018,46(15):85-92[点击复制] |
|
| 摘要: |
| 为提高配电网规划工作的科学性，提出了一种以解决现状电网问题为导向的配电网自动规划方法。首先利用配电网接线模式识别及潮流运算的结果对待规划电网中的典型问题进行识别。其次通过对规划中如线路安全载流量、配变容量等各类电网技术约束及其他普适的边界条件，如馈线挂接配变容量限制、负荷供电距离等进行抽象、量化形成了针对各类典型问题的方案自动生成方法。最后以中压线路重/过载问题及单辐射线路与首端环网线路改造问题为例，对所提自动规划方法进行了详细的说明与验证。 |
| 关键词: 配电网 自动规划方法 辅助决策 典型问题识别 |
| DOI：10.7667/PSPC171123 |
| 投稿时间：2017-07-26修订日期：2017-10-11 |
| 基金项目:国家863高技术基金项目资助(2014AA032705) |
|
| Research on an innovative problem-oriented automatic distribution network planning method |
| GAO Chong,ZHAO Yiqi,TANG Junxi,ZHANG Junxiao |
| (Guangdong Power Grid Development Research Institute Co., Ltd., Guangzhou 510080, China;Beijing Tsingsoft Innovation Technology Co., Ltd., Beijing 100085, China) |
| Abstract: |
| To increase the scientificity of distribution network planning, an innovative problem-oriented automatic distribution grid planning method is proposed. Firstly, the power flow and feeder connection mode identification results are used to identify the typical network problems in the distribution grid to be planned. Then, strategies to automatically generate the solutions to the above problems are designed by quantifying both technical limitations such as line and transformer capacities limits, and practical engineering constraints such as feeder-connected transformer capacity limits, power supply path length limits, etc. Taking a mid-voltage line-overloading problem and two different types of the feeder reconstruction problems as examples, the proposed method is finally verified and explained in detail. This work is supported by National High-tech R & D Program of China (863 Program) (No. 2014AA032705). |
| Key words: distribution network automatic planning method auxiliary decision-making typical problems identification |
