| 引用本文: | 张令涛,赵林,张亮,田国辉,马仲佳.智能电网调控中心变电站图形数据即插即用技术[J].电力系统保护与控制,2018,46(19):74-80.[点击复制] |
| ZHANG Lingtao,ZHAO Lin,ZHANG Liang,TIAN Guohui,MA Zhongjia.Plug and play technology for substation graphics data in smart grid dispatching control system[J].Power System Protection and Control,2018,46(19):74-80[点击复制] |
|
| 摘要: |
| 探讨了智能变电站在调度控制中心的即插即用应用场景，提出并实现了一种智能变电站图形文件在调度控制中心即插即用技术。该技术无需源端维护图形文件，只需要获取变电站SCD模型数据后，自动生成变电站主接线图。方法改变了调度端利用人工绘制变电站接线图的传统方式，通过解析变电站的模型文件，解析出变电站的拓扑关系，利用深度优先搜索算法将设备进行分组。然后构建布局的目标函数，利用全局优化算法逐步寻优的过程中调整布局元件的位置，最终生成变电站的主接线图。为了节省搜索的时间，改进了全局优化算法的邻域搜索策略。将所提出的技术应用于某省500 kV变电站主接线图的自动生成，结果表明此技术能够快速生成主接线图。 |
| 关键词: 智能变电站 即插即用 主接线图 自动布局 模拟退火 目标函数 |
| DOI：10.7667/PSPC171395 |
| 投稿时间：2017-09-19修订日期：2017-11-28 |
| 基金项目:国家重点研发计划项目(2017YFB0902600);国家电网公司科技项目(SGJS0000DKJS1700840)“大电网智能调度与安全预警关键技术研究及应用” |
|
| Plug and play technology for substation graphics data in smart grid dispatching control system |
| ZHANG Lingtao,ZHAO Lin,ZHANG Liang,TIAN Guohui,MA Zhongjia |
| (NARI Group Corporation State Grid Electric Power Research Institute, Nanjing 211106, China;Beijing Kedong Electric Power Control System Corporation Limited, Beijing 100192, China) |
| Abstract: |
| This paper discusses the plug-and-play application scenario of smart substation in dispatching control center, and proposes and realizes a plug-and-play technology of smart substation graphics file in dispatching control center. The technology does not need to maintain the graphics file at the source, only need to obtain substation SCD model, automatically generate substation main wiring diagram. By analyzing the SCD file of the substation, the topology relation of the substation is obtained. The devices are grouped by the depth-first search algorithm in topology relation. Then the objective function of the layout is constructed, and the position of the layout element is adjusted by the global optimization algorithm. Finally, the main wiring diagram of the substation is generated during the iterative optimization process. In order to save the search time, the neighborhood optimization strategy of the global optimization algorithm is improved. The technique of this paper is applied to the automatic generation of the main wiring diagram of 500 kV substation in a province. The results show that this technology can quickly generate the main wiring diagram. This work is supported by National Key Research and Development Program of China (No. 2017YFB0902600); Science and Technology Porject of State Grid Corporation of China (No. SGJS0000DKJS1700840) “Research and Application of Key Technology for Intelligent Dispatching and Security Early-warning of Large Power Grid”. |
| Key words: smart substation plug and play main wiring diagram automatic layout simulated annealing objective function |
