|
| 引用本文: | 高磊,刘鹏,卜强生,等.基于SED文件的智能变电站改扩建二次系统配置文件自动重构技术研究[J].电力系统保护与控制,2019,47(12):153-158.[点击复制] |
| GAO Lei,LIU Peng,BU Qiangsheng,et al.Study on automatic reconfiguration technology of secondary system configuration file based on SED file for smart substation reconstruction and expansion[J].Power System Protection and Control,2019,47(12):153-158[点击复制] |
|
| |
|
|
| 本文已被：浏览 4193次 下载 1856次 |
码上扫一扫！ |
| 基于SED文件的智能变电站改扩建二次系统配置文件自动重构技术研究 |
| 高磊,刘鹏,卜强生,崔玉,张志,顾俊捷,张国辉 |
|
|
| (国网江苏省电力有限公司电力科学研究院，江苏 南京 211103;国网经济技术研究院有限公司，北京 102209;国网江苏电力调度控制中心，江苏 南京 210029;国家电网公司国家电力调度控制中心，北京 100031;南京五采智电电力科技有限公司，江苏 南京 211106) |
|
| 摘要: |
| 针对改扩建工程实施过程中原SCD文件更新时存在版本控制、设计交互困难的问题，结合IEC61850 Ed2国际标准，首次提出了基于SED文件的改扩建二次系统配置文件自动重构技术。采用基于SED文件的局部重构技术在改扩建工程中将SCD文件在设计配置流程上充分解耦，保证了改扩建部分的相对独立性。通过SED文件在改扩建工程中的规则定义机制，保证了已投运设备不会在改扩建设计阶段误修改，同时提升了在运设备的安全性。 |
| 关键词: 智能变电站 SCD文件 改扩建工程 SED文件 自动重构 解耦 |
| DOI：10.7667/PSPC20191219 |
| 投稿时间：2018-06-08修订日期：2018-08-25 |
| 基金项目:国家电网公司科技项目(61602251)“新一代智能变电站二次系统虚回路自动连接与扩建回路自动重构技术研究” |
|
| Study on automatic reconfiguration technology of secondary system configuration file based on SED file for smart substation reconstruction and expansion |
| GAO Lei,LIU Peng,BU Qiangsheng,CUI Yu,ZHANG Zhi,GU Junjie,ZHANG Guohui |
| (State Grid Jiangsu Electric Power Co., Ltd.Electric Power Research Institute, Nanjing 211103, China;State Grid Economic and Technological Research Institute Co., Ltd, Beijing 102209, China;State Grid Jiangsu Power Dispatching Control Center, Nanjing 210029, China;National Electric Power Dispatching and Control Center, State Grid Corporation of China, Beijing 100031, China;Five-C Smart Power Grid Technology Co., Ltd., Nanjing 211106, China) |
| Abstract: |
| In the process of implementation of the reconstruction and expansion project, there are problems of vision control and design interaction when the original SCD file is updated. Combined with the international standard of IEC61850 Ed2, the automatic reconfiguration technology of the secondary system configuration files for the reconstruction and expansion project based on the SED file is proposed for the first time. In the reconstruction and expansion project, the local reconfiguration technology based on SED file is used to fully decouple the SCD file from the design and configuration process, which ensures the relative independence of the reconstruction and expansion. Through the rule definition mechanism of the SED file in the reconstruction and expansion project, it is guaranteed that the operation equipments will not be modified in the design stage of the reconstruction and expansion and the safety of the operation equipments is improved. This work is supported by Science and Technology Project of State Grid Corporation of China (No. 61602251). |
| Key words: smart substation SCD file reconstruction and expansion project SED file automatic reconfiguration decoupling |
|
|
|
|
|
