引用本文: | 刘 健,张志华,张小庆.配电自动化主站的容错故障定位方法[J].电力系统保护与控制,2016,44(20):6-11.[点击复制] |
LIU Jian,ZHANG Zhihua,ZHANG Xiaoqing.Fault location with robustness for distribution automation systems (DAS)[J].Power System Protection and Control,2016,44(20):6-11[点击复制] |
|
摘要: |
为了提高配电网的故障处理性能,建议采用多重化配置反映开关状态的辅助接点和“三取二”原则以提高开关状态信息采集的容错性能的方法。论述了一种利用电气量的关联关系实现开关状态容错的方法,以及可以应用于中压配电网相间短路故障定位、单相接地故障定位以及基于故障投诉信息的低压配电网故障研判中的基于贝叶斯法的容错故障定位方法。并给出了在单相接地定位中的应用例子,分析结果表明所建议方法具有可行性和有效性。 |
关键词: 配电网 配电自动化 相间短路故障 单相接地 故障报修 故障定位 容错 |
DOI:10.7667/PSPC201661 |
投稿时间:2016-07-10 |
基金项目: |
|
Fault location with robustness for distribution automation systems (DAS) |
LIU Jian,ZHANG Zhihua,ZHANG Xiaoqing |
(Shaanxi Electric Power Research Institute, Xi''an 710100, China) |
Abstract: |
To improve the performance of fault processing in distribution networks, an approach of multiplication of auxiliary contacts arrangement with two-in-three principle is proposed to improve the correctness of switch state detection. The approach of correcting the errors of switch states based on the correlation of electrical telemetering information is described. A unified method based on Bayes evaluation to improve the robustness of fault location for interphase short circuit, single phase grounding and fault location of low voltage distribution networks on account of the trouble call information is put forward. An example of single phase grounding location is given to illustrate the proposed approach, showing its feasibility and effectiveness. |
Key words: distribution networks distribution automation interphase short circuit single phase grounding trouble call fault location robustness |