An accurate calculation method of line loss based on reconstructing a photovoltaic outputcurve by daily cumulative power generation
DOI:10.19783/j.cnki.pspc.240599
Key Words:photovoltaic power generation  distribution network  line loss  forward-backward sweep flow method  spectral clustering  dynamic time warping (DTW)
Author NameAffiliation
QIAO Hui1 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
HAN Jinglin2 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
LI Zheng1 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
JIANG Yu3 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
HAN Tianhua1 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
FENG Tao1 1. State Grid Xingtai Power Supply Company, Xingtai 054001, China
2. State Grid Hebei Electric Power Co., Ltd., Shijiazhuang 050000, China
3. State Grid Xiongan New Area Power Supply Company, Baoding 071600, China 
Hits: 765
Download times: 129
Abstract:After the distributed photovoltaic access to the distribution network, there is a large deviation in the calculation of line loss using the traditional algorithm. Therefore, a classification and reconstruction method of a photovoltaic output curve based on daily cumulative power generation is proposed to approximately restore daily output curve. The obtained daily output curve data is used in the improved forward-backward sweep power flow method based on voltage correction to calculate the line loss of the network. Firstly, data preprocessing is carried out, and an improved spectral clustering (SC) algorithm model based on limited dynamic time warping distance (LDTW) is established. The standardized PV output curve is clustered, and the typical output modes in different seasons and weathers are obtained. Secondly, the daily cumulative power generation data collected by the power acquisition meters are classified and the output curve is linearly reconstructed. Finally, the reconstructed output curve is sampled, and the improved forward-backward sweep power flow method based on voltage correction is used to calculate the line loss of distribution network. Cases are verified based on the IEEE 33-node system, and the results are compared with the line loss results calculated by the actual photovoltaic output curve. The example shows that this method can accurately estimate line loss of distributed network by only using the daily cumulative power generation data of photovoltaic meters.
View Full Text  View/Add Comment  Download reader